SAE ARP1533 Procedure for the Calculation of Gaseous Emissions From Aircraft Turbine Engines (Supersedes By Air1533)

时间:2024-05-15 15:22:50 来源: 标准资料网 作者:标准资料网 阅读:9942
下载地址: 点击此处下载
Product Code:SAE ARP1533
Title:Procedure for the Calculation of Gaseous Emissions From Aircraft Turbine Engines (Supersedes By Air1533)
Issuing Committee:E-31 Aircraft Exhaust Emissions Measurement Committee
Scope: This is a procedure for calculation of gaseous emissions data, specifically, emission index, fuel-air ratio, and combustion efficiency for aircraft turbine engines based on the measurement of carbon monoxide, carbon dioxide, total hydrocarbons, and the oxides of nitrogen. Reference 2.1.1 gives procedures for the measurement of gaseous emissions from aircraft turbine engines.This document includes instructions for the adjustment of the measured concentrations of the constituents of the exhaust for: a. the humidity of the inlet air, b. the carbon dioxide content of the inlet air, c. the interference of carbon dioxide and water on the measured concentrations of carbon monoxide and the oxides of nitrogen, d. the interference of oxygen on the measured concentration of carbon dioxide, e. the efficiency of the converter for changing other oxides of nitrogen to nitric oxide, and f. the basis of measurement (semidry or wet).
基本信息
标准名称:放射性标准溶液通用技术条件
中标分类: 能源、核技术 >> 同位素与放射源 >> 同位素与放射源综合
ICS分类: 能源和热传导工程 >> 核能工程 >> 裂变物质
替代情况:替代EJ 704-1992
发布日期:1993-12-13
实施日期:1994-05-01
首发日期:
作废日期:
出版日期:
页数:7页
适用范围

没有内容

前言

没有内容

目录

没有内容

引用标准

没有内容

所属分类: 能源 核技术 同位素与放射源 同位素与放射源综合 能源和热传导工程 核能工程 裂变物质
Product Code:SAE J207
Title:Electroplating of Nickel and Chromium on Metal Parts-Automotive Ornamentation and Hardware
Issuing Committee:Materials, Processes And Parts Council
Scope:This standard covers requirements for several types and grades of electrodeposited nickel/chromium coatings on ferrous or copper alloy basis metals and copper/nickel/chromium on zinc or aluminum alloys for the finishing and corrosion protection of decorative ornamentation and hardware of motor vehicles and marine controls and fittings. Four grades of coatings are provided to correlate with the service conditions under which each is expected to provide satisfactory performance, namely: very severe, severe, moderate, and mild. Definitions and typical examples of these service conditions are provided in Appendix A. Information contained in this document generally conforms to the information contained in ASTM B 456, Specification for Electrodeposited Coatings of Nickel plus Chromium.